Products

Bitumen in every grade the road asks for — and the materials that go around it.

Drummed or bulk, blended where a refinery does not make the grade, and packed for the handling the cargo will actually take.

Bitumen products

Grades and forms

Penetration grade bitumens

Bitumen pen grade 40/50
Bitumen pen grade 60/70
Bitumen pen grade 80/100
Bitumen pen grade 85/100
Bitumen pen grade 120/150
Bitumen pen grade 180/200

60/70 is the bulk grade from most refineries; the rest are blended at origin where required.

Cutback bitumens

MC-30
MC-3000
RC-70

Blended in Saudi Arabia and the UAE, available for re-export.

Bitumen emulsions

Anionic bitumen emulsions
Cationic bitumen emulsions

Sourced regularly from UAE and Saudi blending companies.

Oxidised bitumen

Oxidised bitumen grade 85/25
Oxidised bitumen grade 115/15

For roofing, waterproofing and industrial applications.

Technical specifications

Typical values, grade by grade

Penetration grades and cutbacks are quoted against ASTM or AASHTO; oxidised grades against internationally recognised specifications. Every shipment is certified by an independent inspection house.

Bitumen pen grade 40/50

Typical specifications of bitumen pen grade 40/50, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Penetration at 25°C (100 g in 5 secs)	40	50
2	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
3	Flash point, °C	232	—
4	Specific gravity	1.001	1.06
5	Softening point, °C	45	52
6	Solubility in trichloroethylene (purity in percent)	99	—
7	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
7.1	Loss of mass on heating from the original, percent	—	0.8
7.2	Penetration of the residue (percent from the original)	58	—
7.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	50	—
8	Spot test for standard solvent	Negative	—

Bitumen pen grade 60/70

Typical specifications of bitumen pen grade 60/70, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Penetration at 25°C (100 g in 5 secs)	60	70
2	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
3	Flash point, °C	232	—
4	Specific gravity	1.001	1.06
5	Softening point, °C	45	52
6	Solubility in trichloroethylene (purity in percent)	99	—
7	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
7.1	Loss of mass on heating from the original, percent	—	0.8
7.2	Penetration of the residue (percent from the original)	54	—
7.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	50	—
8	Spot test for standard solvent	Negative	—

Bitumen pen grade 80/100

Typical specifications of bitumen pen grade 80/100, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Penetration at 25°C (100 g in 5 secs)	80	100
2	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
3	Flash point, °C	232	—
4	Specific gravity	1.001	1.06
5	Softening point, °C	45	52
6	Solubility in trichloroethylene (purity in percent)	99	—
7	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
7.1	Loss of mass on heating from the original, percent	—	1.0
7.2	Penetration of the residue (percent from the original)	50	—
7.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	75	—
8	Spot test for standard solvent	Negative	—

Bitumen pen grade 85/100

Typical specifications of bitumen pen grade 85/100, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Viscosity at 60°C in poises	115	140
2	Viscosity at 135°C in cSt (centistoke)	334	376
3	Penetration at 25°C (100 g in 5 secs)	85	100
4	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
5	Flash point, °C	232	—
6	Specific gravity	1.001	1.06
7	Softening point, °C	45	52
8	Solubility in trichloroethylene (purity in percent)	99	—
9	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
9.1	Loss of mass on heating from the original, percent	—	1.0
9.2	Penetration of the residue (percent from the original)	50	—
9.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	75	—
10	Spot test for standard solvent	Negative	—

Bitumen pen grade 120/150

Typical specifications of bitumen pen grade 120/150, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Penetration at 25°C (100 g in 5 secs)	120	150
2	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
3	Flash point, °C	218	—
4	Specific gravity	1.001	1.06
5	Softening point, °C	—	—
6	Solubility in trichloroethylene (purity in percent)	99	—
7	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
7.1	Loss of mass on heating from the original, percent	—	1.3
7.2	Penetration of the residue (percent from the original)	46	—
7.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	100	—
8	Spot test for standard solvent	Negative	—

Bitumen pen grade 180/200

Typical specifications of bitumen pen grade 180/200, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Penetration at 25°C (100 g in 5 secs)	180	200
2	Ductility at 25°C (at specified rate 5 cm per min), min breaking length (cm)	100	—
3	Flash point, °C	218	—
4	Specific gravity	1.001	1.07
5	Softening point, °C	—	—
6	Solubility in trichloroethylene (purity in percent)	99	—
7	Performance when subjected to the thin film oven test or rolling thin film oven test	—	—
7.1	Loss of mass on heating from the original, percent	—	0.2
7.2	Penetration of the residue (percent from the original)	42	—
7.3	Ductility of residue at 25°C at 5 cm per minute, min breaking length (cm)	100	—
8	Spot test for standard solvent	Negative	—

Cutback bitumen MC-30

Typical specifications of bitumen cutback MC-30, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Kinematic viscosity at 60°C in centistoke	30	60
2	Flash point, °C	38	—
3	Water, percent	—	0.2
4	Distillation test — distillate percentage by volume of total distillate to 360°C	—	—
4.1	To 225°C	—	25
4.2	To 260°C	40	70
4.3	To 315°C	75	93
5	Residue from distillation to 360°C (680°F), volume percentage of sample by difference	50	—
6	Tests on residue from distillation	—	—
6.1	Absolute viscosity at 60°C (140°F), poises	300	1200
6.2	Ductility, 5 cm/min, at 25°C (77°F), cm	100	—
7	Solubility in trichloroethylene, percent	99	—
8	Spot test for standard solvent	Negative	—

Cutback bitumen MC-3000

Typical specifications of bitumen cutback MC-3000, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Kinematic viscosity at 60°C in centistoke	3000	6000
2	Flash point, °C	66	—
3	Water, percent	—	0.2
4	Distillation test — distillate percentage by volume of total distillate to 360°C	—	—
4.1	To 225°C	—	—
4.2	To 260°C	—	15
4.3	To 315°C	15	75
5	Residue from distillation to 360°C (680°F), volume percentage of sample by difference	80	—
6	Tests on residue from distillation	—	—
6.1	Absolute viscosity at 60°C (140°F), poises	300	1200
6.2	Ductility, 5 cm/min, at 25°C (77°F), cm	100	—
7	Solubility in trichloroethylene, percent	99	—
8	Spot test for standard solvent	Negative	—

Cutback bitumen RC-70

Typical specifications of bitumen cutback RC-70, in line with the specifications of ASTM or AASHTO. The product will be packed in clean, rust free steel drums of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Kinematic viscosity at 60°C in centistoke	70	140
2	Water, percent	—	0.2
3	Distillation test — distillate percentage by volume of total distillate to 360°C	—	—
3.1	To 190°C	10	—
3.2	To 225°C	50	—
3.3	To 260°C	70	—
3.4	To 315°C	85	—
4	Residue from distillation to 360°C (680°F), volume percentage of sample by difference	55	—
5	Tests on residue from distillation	—	—
5.1	Absolute viscosity at 60°C (140°F), poises	600	2400
5.2	Ductility, 5 cm/min, at 25°C (77°F), cm	100	—
6	Solubility in trichloroethylene, percent	99	—
7	Spot test for standard solvent	Negative	—

Oxidised bitumen grade 85/25

Typical specifications of oxidised bitumen grade 85/25, in line with internationally recognised specifications. The product is packed in steel drums or kegs of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Softening point, °C	80	90
2	Penetration at 25°C	20	30
3	Loss on heating for 5 hrs at 163°C, loss by mass % of original	—	0.2
4	Solubility in trichloroethylene, percent	99.50	—

Oxidised bitumen grade 115/15

Typical specifications of oxidised bitumen grade 115/15, in line with internationally recognised specifications. The product is packed in steel drums or kegs of size as required by the buyer.

Typical values. Certificates of analysis are issued per shipment by an independent inspection house.
S. No	Technical specification	Min	Max
1	Softening point, °C	110	120
2	Penetration at 25°C	10	20
3	Loss on heating for 5 hrs at 163°C, loss by mass % of original	—	0.2
4	Solubility in trichloroethylene, percent	99.50	—

Road construction materials

Everything else the job needs

Road marking paints

Both thermoplastic and acrylic.

Geotextiles

For separation, reinforcement and drainage layers.

Gabions

Both boxes and mattresses.

Guardrails and culverts

Highway safety barrier and drainage sections.

Fencing materials

Supplied alongside guardrail and gabion orders.

Cement

Ordinary Portland cement, sulphate resisting cement and oil well cement.

Paraffin wax

A product with about four hundred uses

Paraffin wax is a product with about 400 different uses. From the coating of paper used to wrap bread in countries like India, it also goes into candles, cable coating, sealants and match box manufacture. There are several types of wax and their grades depend on the melting point and the oil content: the lower the oil content, the better the quality of the wax.

Paraffin wax is an industry-based product and we supply it regularly to India, Kenya and Ethiopia, where most users are candle and match box manufacturers.

Grades supplied

Food grade
Candle grade
Industrial slack wax

Tell us the grade, the quantity and the discharge port.

We will come back with origin options, packing, a shipment mode and an indicative timeline.

Get in touch [email protected]